Do it Yourself Tar & Chip

Save

Cost effective, yet attractive, driveway paving options are of interest to homeowners with driveways of all shapes and sizes. Fortunately, the tar and chip method provides a reasonably priced, eye-appealing way to seal driveways with low cost long-term maintenance. Tar and chip paving combines asphalt and stone to create a textured, hard surface. The end result is a driveway that provides more texture than plain asphalt and better traction in slick conditions. Although tar and chip driveways are typically installed by professionals, do-it-yourself enthusiasts equipped with the proper equipment and knowledge will be able to complete the process independently.

Things You'll Need

  • Shovel
  • Wheel barrel
  • Gravel
  • Large rake
  • Hot liquid asphalt
  • Liquid asphalt sprayer
  • Industrial roller
  • Select the color and style of gravel chips that will be installed as the top layer of the tar and chip surface. Purchase about two-and-a-half tons of gravel chips for every 100 square yards of area that will be treated with tar and chip. Arrange for the gravel to be delivered prior to installing the surface. Gather the required materials and equipment at the work site prior to beginning the tar and chip process.

  • Roll out a firmly compacted dirt roadbed for the driveway using a heavy machinery roller. Install a thick layer of medium crush gravel along the road bed of the driveway. This layer will act as a base for the tar and chip process and should be capable of withstanding the weight of a vehicle. If a previously installed driveway surface, such as asphalt or concrete, is already in place you do not need to install an initial layer of gravel.

  • Rent a liquid asphalt sprayer, filled with hot liquid asphalt, from a local equipment rental supplier. Spray a 3/8 inch to 1/4-inch thick layer of liquid asphalt over the gravel base. Plan to use about 50 gallons of liquid asphalt for each 100 square yards of driveway that will be sprayed.

  • Dump gravel chips onto the liquid asphalt while the asphalt is still hot and sticky. Spread the gravel using an industrial rake to a uniform thickness of approximately one inch. Work forwards while installing the gravel chips, walking on the tarred area that has already been covered with chips.

  • Roll the gravel chips into the tar coating with an industrial roller machine. Once the gravel chips have been compacted into the liquid asphalt, allow the driveway to set for at least 48 hours before driving on the surface.

Related Searches

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • What Is Chip Seal?

    A chip seal is a treatment of the surface of a paved road. It is designed to seal and protect the pavement...

  • How to Gravel and Tar a Driveway

    A tar-and-chip driveway, constructed from layers of gravel, tar and gravel chips, can be a cost-effective and attractive driveway option in many...

  • The Best Materials for Driveways

    With most home renovation projects there are many options when it comes to building materials, and how much they will cost the...

  • Cost of Chipseal Vs. Paving

    Chipseal and repaving are two options for resurfacing an existing road or driveway. These methods can extend the life of a road...

  • Asphalt Paving Vs. Chip Sealing

    Fairly common while traveling along the nation's roadways is to see road construction and improvements. In fact, most travelers along the highways...

  • Driveway Paving Options

    The material you select to pave your driveway will have a major impact on the overall project, both in terms of price...

  • Road Construction Methods

    The basic construction process for building a road is similar for any road. The differences arise in the finishing of the road...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!