How to Repair a Drywall Bump


If a bump in drywall is not caused by a popped nail or screw, you can still remove the bump and repair the drywall to a more attractive, smooth surface. Part of this repair includes sanding, which will produce a lot of fine dust when you use sandpaper on the drywall. Protect yourself when using sandpaper, by wearing goggles and a dust mask. When sanding drywall joint compound, use a drywall sponge, which involves a slower, but less messy, process than using sandpaper.

Things You'll Need

  • 150-grit sandpaper
  • Wood block
  • Utility knife
  • Drywall knife
  • Drywall joint compound
  • Press the bump with your finger to determine if it is hard or soft. Proceed to Step 3, if the bump is not solid. Wrap 150-grit sandpaper around a wood block, if the bump is hard.

  • Sand the bump lightly with the sandpaper. Use slow, smooth strokes until the bump is level with the rest of the drywall surface.

  • Cut an outline around the bump, using a sharp utility knife. Pry the utility knife blade underneath the bump and force the bump from the drywall. Fill the resulting recess with joint compound, using a drywall knife. Allow the compound 24 hours to fully dry.

  • Dip the drywall sponge in a bucket of warm water. Smooth down the ridges in the compound, using the coarse side of the sponge. Dip the sponge into the bucket to rinse it out frequently as you work.

  • Apply a second layer of joint compound, using a drywall knife. Allow this layer 24 hours to dry.

  • Smooth down the repaired spot, with a drywall sponge dipped in warm water. Paint the repaired section of wall to match the surrounding wall.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Sand Drywall

    Preparing walls for a fresh coat of paint can make or break the project. An even wall is necessary for a smooth...

  • How to Repair Drywall Nail Holes

    Buying a new home or remodeling an old room in your existing home sometimes calls for a complete makeover in paint, flooring...

  • How to Fix Peeling Drywall Tape

    The only real way to fix peeling drywall tape is to remove it and replace it. Peeling indicates that the tape was...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!