How to Replace Foosball Parts on a Sheltie
Shelti makes a range of popular table games such as billiards, darts and foosball. The Shelti foosball line includes tables for home or commercial use. Replacement parts are available through Shelti. The tables are designed to require little in the way of hand tools to replace and repair. If you have a Shelti table in need of replacement parts, order them directly through Shelti and install them yourself.
Other People Are Reading
Things You'll Need
- Replacement parts -- available through Shelti
- Compressed air gun or air canister
- Small flat head screwdriver
- Phillips screwdriver
Instructions
-
-
1
Remove the balls and loose parts off the table and with an assistant, turn the Shelti table upside down to access the legs. Turn the leg to be replaced counterclockwise and unscrew the support-retaining screw out from the table. Screw the new leg into the existing leg hole. Use a black rubber gasket with the new leg. Turn the table back over.
-
2
Insert the tip of the compressed air gun into the edge of the rubber handle grip and turn on the air. As the rubber handle lifts off the metal rod, pull it off. Place a replacement handle onto the rod.
-
-
3
Unscrew any broken foosball men at the single back-screws. This opens the c-clamps retaining the foosball men on the rods. Place the replacement man onto the rod at the same location. Align the man by looking straight down the line of the other foosball men on the same rod. Make sure the feet align at the same angle. Insert the retaining screws and tighten.
-
4
Order replacement balls via Shelti if you are in need of new balls for the table.
-
5
Align and replace the goalie man by unscrewing the single retaining screw on the back of the man. This releases the goalie's clamp. Remove and replace. Because the goalie is a single man on the rod, no alignment is needed.
-
1
