How to Wire an Ez-Go Meter
The Ez-Go is an electric golf cart designed for use on private and public golf courses. You must charge it before use. Installing a meter showing the charge remaining in the battery will help you determine when you should recharge the cart. The battery in the Ez-Go cart is located under the seat. Once you mount the charge meter, you will need to wire the meter to the battery. The terminals on the left side are the positive connectors, and the terminals on the right are the negative ones.
Other People Are Reading
Things You'll Need
- Charge meter
- 2 red color 18-gauge wires
- 2 black color 18-gauge wires
- 2 5/16-inch ring terminals
- 1/8-inch ring terminal
- 1/2-inch ring terminal
Instructions
-
-
1
Lift up the seat of the Ez-Go cart so you can clearly view the battery.
-
2
Connect a red wire to the positive charge terminal on the battery. The positive charge terminal is the port in the upper left-hand corner of the battery and is labeled with a "+." Secure the wire to the terminal using a 5/16-inch ringlet.
-
-
3
Connect the other end of the red wire to the charge meter's positive terminal. The positive terminal will be labeled with a "+." Secure the wire to the terminal using a 5/16-inch ring terminal.
-
4
Connect the black wire to the terminal in the left-hand corner of the terminal on the right side. Secure the cable to the battery with a 1/8-inch ring terminal.
-
5
Connect the other end of the black wire to the negative port on the charge meter. Secure the cable to the meter using the 1/2-inch ring terminal.
-
1
