Installation Instructions for a Grohe Shower Head 28 197

The Grohe 28 197 shower head comes with four different spray patterns, an anti-lime system and adjustable angles so you can turn the shower head where you want it to spray. The spray patterns include a wide spray, pulsating, needle jet and champagne. To install your Grohe 28 197 shower head you have to remove the old shower head from your bathroom first.

Things You'll Need

• Adjustable wrench
• Cloth

Instructions

1. Turn off the water to the shower and loosen the old shower head with the adjustable wrench, if needed. Remove the old shower head.

2. Place the O-ring over the shower pipe and screw the 1/2-inch national pipe thread mounting screw that came with your Grohe 28 197 shower head over it. Tighten the screw with your hands. Screw the Grohe 28 197 shower head over the mounting screw. Tighten the shower head to the screw with your hands or the adjustable wrench.

3. Turn on the shower water.

4. Turn the dials on the side of the Grohe 28 197 shower head to alter the type of spray. The illustrations signify different styles of spray the shower head offers.

Tips & Warnings

• Scratching the surface of the Grohe shower head during installation will void the product's warranty. Avoid scratching the surface of your new shower head by wrapping a cloth around it before you tighten it with the adjustable wrench.

• Improper installation will also void the warranty of this product.

References

• Grohe 28 197 000C Relexa Starlight® Manual; Grohe Company; n.d.