How to Replace the Water in My Swimming Pool
Swimming pools are fun to use but require periodic maintenance. You should replace the water in your swimming pool at least once per year. To remove the water from your swimming pool, use a submersible pump. Once the water is removed, you can use a pressure washer to clean the surface of your pool. To refill the pool with water, use an ordinary garden hose. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Insert a submersible pump into the deepest end of the pool. Take care not to get the end of the pump's electrical cord wet. Attach the pump hose to the fitting on the end of the pump and run the hose to the street. Plug the pump's electrical cord into an electrical outlet. Water from the pump will begin to flow out the pump's hose onto the street. Allow the pump to run until the pool is empty. Once the pool is empty, remove the pump.
-
2
Clean the pool. Use a pressure washer to clean the surface of the empty swimming pool. Sweep and remove all debris.
-
-
3
Run a garden hose to the deepest end of the pool. Turn the garden hose on and allow water to flow from the hose into the pool until the swimming pool is full.
-
1
