Installing Window Tinting in Homes

Tinted windows

Tinting the windows in your home is done with window film, like the material used to tint vehicle windows. Create privacy and an element of decor by placing window tint film on the windows of your choice. You can add film to resemble the look of stained glass, or simply place a basic tint film over the desired window for seclusion.

Things You'll Need

• Hot water
• Cloth
• Tape measure
• Utlity knife
• Clear nail polish

Instructions

1. Clean the surface of the window with hot water and a clean cloth. Chemicals used in cleaning windows may interfere with the application of the film, so should not be used. Wait for the window to air dry.

2. Measure the window for length and width, transferring the measurments to the film sheet. Cut the sheet to fit the specifications.

3. Separate the film from the protective backing and carefully press it onto the window. Start at the top, making sure the corners are straight, and work your way down slowly for an even fit.

4. Press out air bubbles by rubbing your hands down the window, top to bottom. Cut away excess film along the window edges.

5. Apply clear nail polish to the edges of the film to resist peeling from wear and tear. Allow the window 24 hours to sit without being touched.

Tips & Warnings

• Spray a very light mist of warm water on the windows before applying the film. This will make the film easier to remove and readjust if necesary.

• Puncture remaining air bubbles carefully with a straight pin and smooth out the air.

References

• Ford F 150: Tinting Windows