How to Put Up Wall Murals

Installing a wall mural can transform any room into your favorite location or setting. You can build your entire decor around a mural. A wall mural is a wall-sized picture that comes in sections. It is installed in much the same way that traditional wallpaper is installed. They are best suited in areas of low humidity, such as a bedroom or living room. Wall murals should be installed over smooth drywall and not paneling or textured finishes.

Things You'll Need

• Clean, dry cloth
• Scraper
• Scissors
• Tape measure
• Sponge

Instructions

1. Wipe down the walls using a clean dry cloth to remove any cobwebs or dust. Scrape any existing wallpaper off of the walls so that the mural will adhere better.

2. Trim the mural to fit your wall. Use a tape measure to measure the size of the wall and mark off the mural. If the mural is smaller than your wall there will be no need to trim the mural.

3. Locate the center of the wall with the tape measure. Draw a straight line down the middle of the wall. Install the mural panels beginning with the center and moving to the outside of the wall.

4. Apply a thin coat of wallpaper paste to the back of the center mural panel. Use a small paintbrush to brush the paste on evenly.

5. Install the first mural panel next to the center line that you drew on the wall. Use a damp sponge to press the wall mural on to the wall. Begin with the center of the panel and gently wipe towards the outside edge of the panel to remove any air bubbles.

6. Place the remainder of the panels on to the wall. Rub off any excess glue with a dry towel.

References

• Mural Superstore: How to Install Wall Murals
• The Internet Wallpaper Store: Mural Installation
• Art For Your Walls: Installing Wallpaper Murals