Plan the perfect garden with our interactive tool →

How to Use Concrete Blocks for Cattle Guards

Thinkstock/Comstock/Getty Images

Rural communities have a unique set of challenges. Long distances to business districts, omnipresent wildlife hungry for planted crops, political neglect and difficulties in law enforcement all contribute to hardships for farmers and their neighbors. Many place accounting for and protecting their livestock at the top of the list. Prone to wonder, herd animals require safeguards in the absence of constant supervision. Cattle guards are an answer to this need, allowing vehicles to pass the property boundaries while inhibiting farm animals from doing likewise. These embedded grids vary in the materials of which they are composed. Concrete is among the choices available.

Step 1

Estimate the maximum weight of the vehicles that will transverse the cattle guard. The style, depth and density of the concrete blocks depend on this information. The American Association of State Highway and Transportation Officials (AASHTO) publishes load capacities for vehicles with reference to cattle guards. (See Resources.)

Step 2

Dig a trench of about 1 foot in depth. Make the width a foot wider than the proposed guard. Length is determined by the width of the access road that leads from the public road onto the property. Install a French drain or tiling if necessary to remove accumulated water.

  • Estimate the maximum weight of the vehicles that will transverse the cattle guard.

Step 3

Purchase concrete blocks suitable for the weight class of the vehicles under which they will support. Solid blocks, in this case, have an advantage over hollow or cellular blocks. They should be 18 inches from end to end and have a thickness of 4 to 6 inches. Solicit recommendations from your concrete dealer.

Step 4

Apply concrete to the floor and walls of the trench. Six inches of thickness is proper for cattle grids. Place blocks standing lengthwise into the floor immediately after pouring the concrete. Form rows of adjacent blocks, joining them with mortar. Space the rows about 5 inches apart. The block rows serve as both grid and support.

  • Purchase concrete blocks suitable for the weight class of the vehicles under which they will support.
  • Place blocks standing lengthwise into the floor immediately after pouring the concrete.

Related Articles

How to Build a Dock for a Pond
How to Build a Dock for a Pond
Do it Yourself Sliding Gate Opener
Do it Yourself Sliding Gate Opener
How to Tie Wooden Posts to Cement Blocks
How to Tie Wooden Posts to Cement Blocks
How to Terrace With Railroad Ties
How to Terrace With Railroad Ties
How to Measure for a Chain Link Gate
How to Measure for a Chain Link Gate
Proper Fence Board Spacing
Proper Fence Board Spacing
How to Build a Porch Foundation
How to Build a Porch Foundation
Town of Brookhaven Fence Requirements for a Swimming Pool
Town of Brookhaven Fence Requirements for a Swimming...
How to Build a Chain Link Gate
How to Build a Chain Link Gate
Should Stair Treads Be Glued?
Should Stair Treads Be Glued?
How to Build a Sorghum Syrup Evaporator Pan
How to Build a Sorghum Syrup Evaporator Pan
Ohio Laws for Private Swimming Pool Privacy Fencing
Ohio Laws for Private Swimming Pool Privacy Fencing
How to Make a Plot Plan of Your House
How to Make a Plot Plan of Your House
How to Lay Landscaping Fabric Behind a Retaining Wall
How to Lay Landscaping Fabric Behind a Retaining Wall
Garden Guides
×