How to Glue Round Wood

Make repairs to, or build with, round wood using wood glue.

Wood is glued together to make furniture, toys and other items around a home. Wood glue is a specially formulated glue designed to bond with porous wood and hold if firmly together. Wood of different shapes, including round, can be successfully glued when the proper steps are followed. Preparation is essential so that the surface of the round wood bonds securely with the surface of the wood to which it is being glued.

Things You'll Need

• Fine grit sandpaper
• Adjustable wood clamp
• Damp rag

Instructions

1. Test fit the round wood by placing it against, or fitting it into, the wood to which it will be attached.

2. Lightly sand the areas of the round wood that will be connected to another wood surface with a fine-grit sandpaper to remove any surface finish, dirt, debris or oils. Wipe the round wood with a damp rag to remove sanding dust.

3. Apply a thin coat of wood glue to the round wood where it will contact the other wood surface. Apply a thin coat of wood glue to the other wood surface at the contact point.

4. Place the round wood into the other piece of wood so it is held securely in place. Clamp the round wood in place with an adjustable wood clamp, if necessary, to hold it in place against another piece of wood.

5. Wipe excess glue that seeps from the connection point between the round wood and other piece of wood with a damp rag. Allow the wood glue to set and cure overnight for best results.

Tips & Warnings

• Select a time to use the wood glue when the temperature is above 55 degrees Fahrenheit. The temperature should be above 55 degrees in order for the glue to properly bind the wood pieces together.

References

• Elmers: Wood Glue - Instructions