The Uniden Washington Citizens Band Transceiver Radio is a 40-channel single sideband base station that includes an analog RF meter and digital channel indicator. The problems you may encounter while using this device are that the transceiver may not operate properly and you may experience trouble receiving. Troubleshoot these problems by checking the fuse and power cord, adjusting the squelch and making sure the coaxial cable line is connected and corrosion-free.
Related Searches:
Difficulty:
Moderately Easy
Instructions
1
Check the fuse and power cord if the transceiver is not operating completely. Make sure you use an AC power source when connecting the AC power cord and do not connect the device to a DC power source.
2
Inspect the "On/Off Volume Control" setting if you experience trouble with receiving. Make sure the squelch control is properly adjusted and make sure the radio is not over squelched. Adjust the squelch control by turning it clockwise until you hear a click. Do not turn it too far. Turn the "RF Gain" control all the way clockwise. Make sure the radio is in operational mode.
3
Make sure the coaxial cable transmission line is connected securely to the Antenna connector. Ensure the antenna is extended fully for it to work properly. Make sure all coaxial cable transmission lines are corrosion-free and are secure.
The Uniden Grant is a professional CB radio with 40 channels that offers clear reception and strong transmissions. Uniden America Corporation warrants...
Uniden's Very High Frequency (VHF) radios are for marine applications. Uniden also make non-marine, two-way radios for General Mobile Radio Service (GMRS)...
Uniden produces a wide array of phones such as the Uniden CEZAI998 series with large, easy-to-read displays, well-spaced buttons, and sound amplification...
Uniden scanners are devices that monitor many types of communications, such as police and fire department communications, aircraft communications and weather ...
