Ford Rangers equipped with separate front bucket seats have a center console. The console has an armrest that doubles as a storage compartment, as well as a cup holder and coin holder. Models without the separate front bucket seats simply have a flip-down armrest. If your Ranger's center console gets damaged, you can easily remove it and replace it with a new one. The process only takes about 30 minutes with common tools.
Things You'll Need
- Phillips screwdriver
- Replacement console
Open the center console lid. At the bottom you'll find two Phillips head screws. Remove these with a Phillips screwdriver. Keep these screws, as well as the other screws and bolts you'll remove, in a small cup for storage. You'll need them to install the new console.
Inspect the front part of the console, beneath the radio. In the coin holder area, you'll find four bolts. Remove the four bolts with a ratchet.
Inspect the center part of the console. You'll find two Phillips-head screws. Remove these with a Phillips screwdriver.
Pull the console upward to unhook it from the floorboard. Remove it from the Ranger. With the console removed, you'll see the mounting brackets for the console and the nuts the screws and bolts go into. It is not necessary to remove these brackets when replacing the console.
Move the replacement console into the cabin. Line up the console with the mounting brackets on the floorboard. The console screw and bolt holes should be lined up with the mounting bracket's nuts.
Hold the console firmly in place with hand. Insert and tighten the two Phillips-head screws in the console storage compartment, and then insert and tighten the four bolts at the front part of the console. Insert and tighten the two Phillips-head screws in the center of the console.
Tips & Warnings
- The console removal and replacement procedure also applies to the Mazda B-Series truck, which is a clone of the Ford Ranger.
- "1983 to 2010 Ford Ranger Repair Manual"; 2010; Haynes
- Photo Credit Jupiterimages/Photos.com/Getty Images
How to Remove a Console From a 1996 Ford Explorer
When equipped with front bucket seats, the 1996 Ford Explorer has a large console mounted to the front floorboard, between the driver...
How to Remove the Center Console From a Ford Focus
On the center console of the 2012-to-2014 Ford Focus S, the trim panels are held on with hidden clips -- most of...
How to Remove the Center Console in a 1998 Ford Explorer
The 1998 Ford Explorer's center console provides an area to put cups, hold the shift knob and the emergency brake. If you...
How to Remove the Dash From a 1996 Ford Ranger
Removing the dashboard from your 1996 Ford Ranger is fairly simple. Thee are three main pieces of the dashboard: the center console...
How to Install an Armrest in a Ford Ranger
Ford Ranger models with the 60/40 split bench seating arrangement come with an armrest attached to the driver's side seat. If this...