Every lock has a duplicate key to it somewhere. For security purposes, rekeying an ignition lock is sometimes cheaper than having a locksmith install a new lock. Rekeying doesn't replace the lock; it changes the tumbler set inside the lock to accept a new key with a different cut pattern. The change in tumblers requires moving them within the lock. The process is simple, but working on such small mechanisms takes patience and a steady hand.
Things You'll Need
- Small screwdriver set
- Magnifying glass (optional)
- New key
Grip the steering column and feel for the screws that hold the plastic protective shield together. Unscrew all clamps and screws, and pull the protective shield off the steering column. Unscrew the ignition switch, and pull the ignition lock out of the switch housing.
Insert the old key into the ignition lock. When you pull the key out, the center piece of the ignition lock will separate from the solid outer ring. If the centerpiece isn't coming out, turn the key a little bit until it grabs the center piece and you can pull it out. Remove the outer rings, and with a small screwdriver remove the cover plate on the tumbler.
Look for small springs under the cover plate. Use the screwdriver to remove the springs, and set them aside; they'll need to be reinstalled later. You can now see the tumblers in position to match your key.
Lift the two bars holding the tumblers in place and remove the key and any other springs in the ignition lock.
Pick one tumbler out at a time with the screwdriver, front to back. Insert a new key into the ignition lock and match the tumblers up to fit the key. Put the springs back in place, insert the centerpiece and rings, and screw the cover plate back on.
Put the lock back into the switch and reattach it to the steering column. Screw the steering column plastic shield back together.
Tips & Warnings
- If you lose a spring or a tumbler, simply buy a new lock.
- If the vehicle's doors are powered electrically, make sure they're all unlocked, because while the ignition switch is disconnected you can't lock or unlock them.
- Photo Credit lock image by Alison Bowden from Fotolia.com
How to Replace a Ford Focus Ignition Switch
The ignition switch in a Ford Focus uses a simple ignition lock and switch mechanism that is secured to the steering column....
How to Rekey a Weiser Lock
If the security of your home is compromised, consider rekeying your locks rather than replacing them. Weiser locks come with a Smart...
How to Remove an Ignition Key Cylinder
Removing the ignition key cylinder is a straightforward task. This repair is essential if you have broken a key off in the...
How to Replace a Lost Ignition Key
If you lose your car keys, you’re likely to feel helpless and confused, especially if you don’t have access to a spare...
How to Remove a GM Ignition Lock Cylinder
General Motors produces Chevrolet, GMC, Cadillac and Buick vehicles. GM also produced Pontiac and Oldsmobile cars; but as of 2010 and 2004...
How to Replace a Stolen Car Key
A stolen car key can be a major inconvenience. Unlike a permanently lost car key, which can be replaced, a stolen car...
How to Unlock an Ignition Switch
A common security feature on cars and trucks is the ability to lock the steering wheel and ignition switch when a car...
How to Re-Key a Nissan Car
If you have lost all of the keys to your Nissan, you can spend several hundred dollars to have the ignition cylinder...
How to Replace Lock Tumblers on a Dodge
Dodge lock tumblers can fail over time, making it difficult to start your car´s engine. Many lock tumblers experience some sort of...
How to Rekey Mortise Cylinder Locks
Trying to rekey a lock? Learn how to use mortise cylinders in this free home security from a professional locksmith.
Dodge Dakota Ignition Lock Cylinder Removal
The ignition lock cylinder is the most recognized component of the Dodge Dakota's ignition system. Often mistaken for the actual ignition switch,...