How to Install a Pressure Gauge on a Sprayer
When setting up your sprayer system, you may want to install a pressure gauge to monitor system output. These are fairly inexpensive and will show your water pressure in pounds per square inch (PSI) at a glance. Before you purchase one, you need to know what your average expected pressure output is going to be. The gauge range should be double the amount of your expected pressure to ensure accuracy. You also need to know the thread size on your sprayer and water source. This will save you the trouble of buying more connectors. Does this Spark an idea?
Instructions
-
-
1
Turn off the water supply. Spray out all of the excess water from the sprayer so that you don't get hit with pressurized water when you install the gauge.
-
2
Locate the water outlet. If you are using a pressurizer pump, this is where the hose connects from the pump to the sprayer.
-
-
3
Unscrew the hose from the pump.
-
4
Wrap a layer of plumbers tape around the connector at the water source. This will ensure easy removal of the gauge later.
-
5
Screw the pressure gauge onto the outlet. Do not hold the gauge component when you do this. Instead, grasp the metal fitting. Once you have it tight with your hands, tighten the connection up completely using the wrench.
-
6
Wrap plumbers tape around the gauge output.
-
7
Screw the hose back onto the gauge. Tighten with the wrench if necessary.
-
8
Slowly turn the water back on to ensure there are no leaks and that all the fittings are tight.
-
1
Tips & Warnings
Explain your spray system and pressure requirements to a professional when you purchase your gauge. They will help you find the gauge that is right for you.
Don't forget to turn the water off before installing or removing components, especially when dealing with high pressures.
References
Resources
- Photo Credit pressure guage image by Jeff Davies from Fotolia.com
