Many models of front-loading washing machines have an optional pedestal that is installed below the washer. This pedestal raises the washing machine off of the ground, reducing the strain placed on your back by the act of doing laundry. The pedestal has adjustable legs that are designed to help level the washing machine. If one or more of these legs are improperly matched, however, then both the pedestal and the washer become uneven, resulting in unbalanced wash loads and possible damage to the machine. Thus, ensuring that your washing machine is level is a key component of its proper maintenance.
Things You'll Need
- Wooden block taller than the washer's legs
- Adjustable wrench
Place a level on the top of the washing machine to determine if it is level.
Determine which leg you would like to raise or lower to level the washer. When looking at the level, the bubble will rise to the side with the furthest extended leg. To determine whether to raise or lower the dryer, look at the amount of threading exposed on the legs. If the legs are already greatly extended and a lot of threading is showing, you should lower the higher leg. However, if the legs are not extended, showing little threading, you should raise the lower leg to the same level as the higher leg to level the washer.
Gently raise the side of the washer that you have decided to adjust and slide the wooden block under it to remove the washer's weight from the leg.
Loosen the lock nut on the top of the pedestal leg with an adjustable wrench. Set the adjustable wrench to fit the lock nut and then turn it counterclockwise to move it away from the pedestal base.
Turn the leg with the adjustable wrench clockwise to lower it or counterclockwise to raise it.
Re-secure the leg's lock nut by turning the adjustable wrench clockwise once the washing machine is level to ensure that the legs do not move in the future.
- Photo Credit Ryan McVay/Photodisc/Getty Images
How to Install a Front Load Washer
Front load washers use less water and less electricity than the standard top load models. When it comes time to replace the...
How to Level a Front Loading Washing Machine
Front-loading washing machines can make a lot of noise and vibration during the spin cycle if they are not properly leveled. The...
How to Move a Whirlpool Front Loading Washing Machine
Front-loading washing machines are quite popular, since they're made to conserve energy and wring out laundry well. The washer drum is oriented...