How to Replace a Bathtub Faucet With a Single Handle

Save

Single-handle faucets use a single cartridge or valve to control the amount of both hot and cold water that flows from the bathtub's spout. Repairing leaks on single-handle faucets does not require the guesswork two- or three-handle faucets may require. Similarly, single-handle faucets also require less time and effort to remove and install; thus, changing your faucet for a more modern faucet becomes an easier job. To perform any work on a faucet, you will need to know where your house's main water valve is located.

Things You'll Need

  • Screwdriver
  • Allen wrench
  • Wrench
  • Needle nose pliers
  • Close the main water valve to shut off the water in the house. Open another faucet all the way to test that the water flow has ceased, as well as to relieve any pressure left in the plumbing.

  • Locate the screw that holds the faucet's handle in place, normally located at the base of the handle or underneath a plastic decorative cap in the middle of the handle. Use a screwdriver to remove the screw, then pull the handle off the faucet.

  • Use a wrench to remove any nuts or plastic adapter rings from the valve cartridge. Use a pair of needle nose pliers to pull out any metal retaining clips or pins from the middle or side of the cartridge.

  • Place either a wrench or the handle over the cartridge and turn counterclockwise to remove the cartridge from the water pipe. Remove the screws that anchor the faucet's back plate to the wall and remove the back plate.

  • Assemble the new faucet in the reverse order that you used to remove the old faucet, starting with the back plate. Once you have secured the handle, open the house's water valve and check the faucet for any leaks.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!