The keys to every successful paint project are surface preparation and coating application. In the case of an aluminum engine block, the process is complicated by the presence of oily grime and the unique surface properties of aluminum. Backyard mechanics typically perform cleaning and painting of an aluminum engine block during the larger process of rebuilding an engine.
Things You'll Need
- High-pressure painting equipment, including high-capacity air brush spray guns
- Commercial air compressor with at least a 60-gallon tank
- Air hoses
- Media blasting equipment and blasting media, such as bead blasting media
- Spray booth and blasting booth (not necessary but recommended)
- OSHA-approved particle and paint sprayed respirators
- High temperature quick drying paint primer
- High temperature paint finish coats
- Paint solvents
- Clean rags
- Rubber gloves
- Masking tape
Remove and disassemble the vehicle's motor. As the engine block is disassembled, identify the individual parts that will be painted, and set them aside. Because of the labor-intensive nature of this process and the multiple steps involved, walk all the parts through this process simultaneously.
Begin the cleaning procedure by having the bloc "hot tanked" by a reputable engine rebuilding facility. Dip the entire engine block in a tank of hot petroleum solvents which will soften and remove existing dirt and grime. While different processes are available for cleaning aluminum motor parts, many of them, such as sand and soda blasting, will negatively affect the aluminum motor surfaces. For this reason, hot tank cleaning is the recommended method for cleaning aluminum heads and engine blocks.
Examine the parts once they are clean and cool to determine if any residual petroleum film remains on the aluminum surface. This residue interferes with coating adhesion during the painting process. If this film exists, clean the parts a second time. If no film is present, skip the next two steps.
Protect all smooth metal surfaces that will receive gaskets during reassembly by covering them with masking tape and cardboard. The gasket surfaces must be smooth, free of paint debris and undamaged when the engine is reassembled.
Bead blast any solvent residue from the engine block and related "hot tanked" pieces. The glass bead blasting material will polish the soft aluminum surface and prepare it to receive new coatings.
Surface Preparation and Priming
Re-apply new masking tape to all engine block surfaces which will receive gaskets during reassembly. Some of the tape may have been damaged during the bead blasting process. Apply masking tape over the openings to any internal areas. Paint should not be applied to gasket mating services or to the engine block's internal areas.
Paint bare metal surfaces with a commercial spray gun and quick-drying, high-temperature primer designed for adhesion to aluminum. Prime the entire exterior area. Follow all manufacturer's safety guidelines.
Allow primer to dry thoroughly before applying topcoat paint.
Finish Paint Coat
Select high-temperature rated finish coatings which are matched to the primer. Every paint type is produced to provide superior performance for specific conditions. Select paint products which match manufacturer's recommendations and the operating condition of the engine.
Apply at least two coats of finish coating. A more satisfactory result will be obtained by applying multiple light coats of finish paint rather than one heavy application. Allow to dry thoroughly.
Remove all masking tape and visually inspect all surfaces which were protected. Use paint solvent to remove any paint-over spray or coatings which were applied to gasket surfaces. Paint spray on gasket surfaces will cause the gaskets to fail during engine use.
- Photo Credit car show image by itsallgood from Fotolia.com
How to Paint an Engine
You may have heard the saying, "A Clean Car Runs Better." Well, that is not totally a myth. When you have a...
How to Paint Aluminum Boats
Aluminum is perhaps the perfect material for building boats, especially flat-bottom fishing and hunting boats. Aluminum is lightweight, durable and easy to...
How to Paint Aluminum Parts at Home
Painting aluminum parts correctly can make the difference between a professional looking, long lasting painted surface and a paint job that cracks...
How to Paint Motorcycle Engines
Engine paint can greatly improve a bike's curb appeal. Whether going with a monochrome paint scheme or painting the engine with black...
How to Paint Sheet Aluminum
Like most types of metal surfaces, sheet aluminum is hard, slick and nonporous. This makes it highly resistant to paint adhesion. Sheet...
How to Polish the Fins on an Aluminum Engine
Aluminum is a lightweight metal that weighs about a third of the weight of steel. Aluminum engines are corrosion resistant with light...
How to Paint Aluminum Motorcycle Engines
Aluminum motorcycle engines can become dirty, greasy and even rusty over the years. Applying new paint to a motorcycle engine can help...
How to Paint Aluminum Engine Heads
When painting aluminum cylinder heads, care must be taken to contain the paint to surface area only. No paint must be allowed...
How to Remove the Steel Bolt From an Aluminum Auto Engine Block
Removing a stuck steel bolt from an aluminum engine block requires patience and skill. Aluminum engine blocks can easily be rendered useless...
Aluminum Auto Painting Tips
The use of aluminum has become commonplace in the auto industry. Because aluminum weighs much less than steel or iron, it is...