How to Paint Shower Stalls With Epoxy


Composed of nonporous materials, such as tile, fiberglass or vinyl, shower stalls are surfaces prone to paint failure. Because paint adhesives are unable to bond with nonporous shower stalls, shedding in the form of chipping or peeling tends to result. If you want to paint a shower stall, sand it first to generate a coarser environment more appropriate for adhesion. Because shower stalls are consistently inundated with water, they aren't appropriate for ordinary paint. Choose a lasting epoxy finish, or expect serious paint failure.

Things You'll Need

  • Trisodium phosphate cleanser
  • Nylon scrub pad
  • Rags
  • Professional painter's tape
  • Palm sander
  • 120-grit sandpaper
  • 220-grit sandpaper
  • Latex primer
  • 5-gallon bucket
  • Roller frame
  • Nap roller cover
  • 4-inch polyester paintbrush
  • Epoxy paint
  • Wooden stir stick

Prepare the Stall

  • Wash the stall with a powerful cleanser. Scrub away soap scum, using a coarse nylon pad. Be thorough, or adhesion difficulties will follow. Rinse the stall with wet rags. Let the stall dry for three or four hours.

  • Scuff the stall with sandpaper to promote a rougher surface better suited for primer. Use 120-grit sandpaper on tile stalls. Use 220-grit sandpaper on vinyl/fiberglass stalls.

  • Take the time to carefully cover the outer walls and flooring adjacent to the stall. Cover these areas, along with shower hardware, using painter's tape.

Finishing the Stall

  • Pour 1 gallon of primer into your 5-gallon bucket.

  • Apply primer to the stall, using a roller. Prime one stall wall at a time. Smooth that wall, using a polyester brush. Continue until the entire stall is primed. Let the stall dry for two hours.

  • Wash your bucket and application tools with water.

  • Mix the epoxy catalyst and resin in the bucket. Stir the components together for four minutes.

  • Paint the stall as you primed it. Let the stall dry for three hours.

Tips & Warnings

  • If you use a nylon brush to smooth the stall walls, marks will appear in the base and finish. For smooth, attractive results, use a polyester brush.

Related Searches

  • Photo Credit Jupiterimages/ Images
Promoted By Zergnet


You May Also Like

  • How to Paint a Fiberglass Tub or Shower

    How to Paint a Fiberglass Tub or Shower. Ever move into a home or condo that has a tub or shower stall...

  • How to Paint Your Bathtub

    Is your bath tub looking old and dingy? Rather than spend the money for a whole new tub, you can paint your...

  • How to Paint Old Prefab Shower Stall Walls

    A new finish can greatly improve the appearance of a prefabricated shower stall. Unfortunately, it is not easy to paint a prefab...

  • How to Paint Inside a Shower

    There are three important things to consider when painting inside a shower: preparing the surface so that it will hold the paint...

  • Types of Paint for Shower Walls

    Because shower stalls are exposed to heavy moisture and consistent duress, they require a particular type of waterproof paint, capable of withstanding...

  • Bathtub Refinishing Epoxy

    Removing and replacing a bathtub is a labor-intensive and time-consuming task. If you hire a professional, this project can be quite costly....

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!