How to Replace the Head Gasket on a Saturn

Save

Whatever the Saturn model you own, replacing the head gasket is a fairly similar process. If you need to replace your gasket you will find it beneath the head cylinder on top of the engine block. You can pick up the required tools and components which you will need for the work from your local auto store.

Things You'll Need

  • Wrench set
  • Screwdriver set
  • Head gasket
  • Coolant
  • Open up the hood of the Saturn and locate the battery. Use a wrench to disconnect the bolt from the negative terminal. Lift the negative cable away from the terminal.

  • Place a drain pan underneath the radiator. Remove the drain plug from the bottom of the radiator and drain the coolant into the pan.

  • Disconnect the lines attached to the fuel systems pressure and air cleanser outlet tubes. Remove the hoses attached to the upper radiator hose and the coolant bypass hose. All of the hoses can be removed by pulling them from their connectors with your hands.

  • Remove the covers of the timing belt by using a wrench to remove the mounting bolts which fix it in place. Remove the bolts attached to the head gasket. Make sure you keep track of where each bolt goes as you will need to reattach them in exactly the same order when it comes to installing the new head.

  • Place the new head gasket on the engine block. Fix in place with the mounting bolts, inserting them in the correct order and positions. Reattach the removed hoses and covers, following the removal steps in reverse. Remove the radiator cap and place coolant back in to the radiator. Place the negative cable back on the terminal.

References

  • "Saturn Vue Automotive Repair Manual: 2002 Thru 2007"; Tim Imhoff; 2009
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!