Freeze plugs are created when the 4.3-liter Vortec engine is cast. There has to be a way of letting the molten metal flow through the mold. The freeze plug, or freeze plug hole, is a remnant of the casting process. After casting, the auto company puts a plug in the freeze plug hole. The freeze plug offers a way of venting expanding coolant if it freezes. The plug isn't welded in. It can pop out if the frozen, expanding coolant pushes on it.
Things You'll Need
- Emery cloth
- Socket or seal driver
- Adjustable wrench
- Jack stands
Place a large pan under the radiator and take out the drain plug with a wrench. Drain the coolant into the pan, then place the pan of coolant to one side. Replace the drain plug.
Hit the side of the old freeze plug with the drift and the hammer. The old plug will swivel in the hole. Take it out with the pliers.
Rub the emery cloth around the inside of the freeze plug hole.
Coat the bearing surface of the new freeze plug with sealant. If the manufacturer of the sealant recommends a waiting period while the sealant sets or cures, wait until that time has passed. Press the new freeze plug into the hole and seat it with gentle blows of the hammer.
Put the sealer head inside the new freeze plug. Drive it further inside the freeze plug hole with the hammer until it's 1/16 of an inch below the surface of the engine block.
Put the coolant back into the radiator and start the engine.
Test the new freeze plug for leaks.
Tips & Warnings
- Rubber freeze plugs are available but should only be used for emergency repairs. Don't use any sealant on a rubber plug.
- Photo Credit Thinkstock Images/Comstock/Getty Images
How to Replace Freeze Plugs in an OMC Cobra 4.3 Liter Engine
An OMC Cobra 4.3-liter marine engine has six freeze plugs -- three on each sides of the lower engine block. The freeze...
Changing Oil in a 4.3L Vortec
A 4.3L Vortec is a 4.3 liter V6 engine with a much higher air intake, giving it more power than a regular...
How to Locate the 4 Drain Plugs on a 4.3 Mercruiser Engine
The 4.3 Mercruiser engine is a popular inboard motor for boats. It is equipped with four drain plugs. Before boats are stowed...
How to Install a Distributor in a 1997 Chevy Blazer 4.3 Vortec
The distributor in a 1997 Chevrolet Blazer accepts the electrical charge needed for combustion and relays it to the six spark plugs...
How to Replace a Ford Freeze Plug
The freeze plugs in your Ford engine model are a life saver, especially in geographic areas suffering from very low temperatures. The...
How to Install a 3.5 Liter Vortec Intake Gasket
The Chevrolet 3.5-liter Vortec is an inline, five-cylinder engine offered as an option for the Chevrolet Colorado and GMC Canyon. Power is...
How to Replace a Freeze Plug in a Ford Explorer
Freeze plugs in a Ford Explorer serve as engine protection due to damage from freezing conditions. When water freezes in the engine...
How to Change the Freeze Plug on a Buick 3.8 Engine
The Buick 3.8-liter engine is commonly found in GM mid-size and full-size sedans, including Pontiac and Oldsmobile models. The engine contains two...
Easy Removal of Freeze Plugs
Automotive freeze plugs are round metal plugs installed in the casting holes in engine blocks. These plugs are thin and sometimes rust...