There is no time like the present for replacing that ugly, faded and probably cracked dashboard in your Buick Park Avenue. The good news is that doing so is a fairly easy job. In fact, the only difficulty will involve removing the parts that are designed to prevent dashboard removal. You will need only a couple of tools to complete the job, and before you know it the interior of your Buick Park Avenue will be good as new.
Things You'll Need
- Flat-head screwdriver
- Phillips screwdriver
Remove the edges of the trim adjacent to doors and beneath the steering wheel. The trim is what keeps the dash in place and covers all of the wiring. Wedge the flat-head screwdriver under the trim that runs alongside the windshield by the doors and pop the dash loose. Remove these trim pieces and set them aside. Use a Phillips screwdriver to loosen any remaining mounting bolts securing the steering wheel trim.
Loosen the trim along the edges near the doors and under the steering wheel. Use a flat-head screwdriver to pry under the edges of the trim running down the side of the windshield near the doors and pop the trim loose. Slide the trim pieces out of the car and set aside. Use a Phillips-head screwdriver to remove the five to eight mounting bolts holding the steering wheel trim in place. Pull the trim down and discard it.
Grab the temperature control knobs with a pliers and give a sharp tug. Use the pliers to pry off the radio knobs as well. If you can't pry the knobs off, turn them counterclockwise, as occasionally the knobs screw into the dash.
- "Buick, Oldsmobile and Pontiac Full-Size Models 1985 thru 2002, including Buick Park Avenue (Haynes Manuals)"; Haynes; 2003
How to Install a Radio in a Buick Park Avenue
The Buick Park Avenue uses a standard size 1-DIN slot for the radio unit. While the head unit will be quite sufficient...
Buick Dash Removal
It is probably about time to replace that cracked and faded dash in your classic Buick. Removing a Buick dash is not...