Since running boards hang low off the sides of trucks and SUVs, they're prone to impact damage from obstacles such as curbs, stumps and road debris. A damaged running board not only makes your vehicle look shoddy, it may be a safety hazard as well. To rectify the situation, remove the running board before you repair or replace it. Anyone with good auto repair skills can remove a running board in less than 25 minutes.
Things You'll Need
- Floor jack
- 4 jack stands
- Socket set
Lift the side of the truck or SUV using the floor jack. Position two jack stands under the vehicle's frame -- one in the front, the other in the rear -- before slowly lowering the vehicle onto them with the floor jack.
Support the running board with two other jack stands, so it does not fall when you remove the mounting bolts.
Remove the running board mounting bolts where the running board brackets bolt to the vehicle's frame using a socket set. Lift the running board off the jack stands and set it aside.
Lift the vehicle off the jack stands with the floor jack. Move all the stands away from the vehicle by hand. Lower the vehicle slowly to the ground with the floor jack.
How to Install Ford Running Boards
Running boards are not only considered a cosmetic enhancement to a Ford truck or SUV, but they add value to the vehicle....
How to Remove the Daytime Running Lights in a 2009 Lancer
Daytime running lights are a safety feature incorporated into cars and trucks over 10 years ago. The system includes standard light bulbs...
How to Remove the Running Board Light Fuse on a Ford Expedition
The running boards on your Ford Expedition may be equipped with lights that enhance the vehicle's visibility. If the fuse for the...