How to Reprogram an Auto Computer

Save

An outdated or corrupt engine management software can make the auto computer send misleading information to the driver, for example, turning on a dash light when there is nothing wrong with the vehicle. This is one of the reasons a reprogramming is necessary. Reprogramming or updating the computer is possible only on vehicles produced after 1996. Earlier vehicles still need to have the computer module replaced in the event of outdated or damaged software in the ROM chip.

Things You'll Need

  • USB cable
  • Request the manufacturer's engine computer updating software from the car dealer or the manufacturer. Contact the dealer or manufacturer through their websites or call their customer service centers. They will mail the software CD to your address or have you download it to PC.

  • Install the program onto your PC once you receive the CD if you chose this method to get the software. The software will be unzipped and with a shortcut icon added to your desktop.

  • Purchase a vehicle diagnostic scanner at a auto parts store. The scanner normally has a scanner cable included in the package. If not, buy a scanner cable separately.

  • Plug one end of the USB cable into the scanner and the other end into the PC.

  • Plug the power cord into a wall outlet and turn on the diagnostic scanner. Information and choices will appear on the LCD screen. Select the "Import" or "Save..." option on the LCD by pressing the appropriate buttons on the scanner.

  • Click "Start," "Computer" on the PC and double-click the hard drive that you saved the software on. Locate the folder containing the software. Unzip the software if you downloaded it from the Internet; double-click to open the software folder, and then right-click once on the sub-folder that has the ZIP extension. Click "Extract."

  • Drag the software from PC to the diagnostic scanner. The process is the same as dragging files on your computer or to other media storage devices with the mouse.

  • Disconnect the diagnostic scanner from the PC once the software is transferred.

  • Position the car key in the "On" position, which is the first stop on the ignition switch.

  • Locate the vehicle's diagnostic port that is usually beneath the dashboard near the steering column. The port is likely protected by a plastic cover which can be pried open with your fingers. The cover for the port, if present, is about 1-by-1-inch in size.

  • Insert the scanner cable into the vehicle's diagnostic port. Plug the other end of the cable into the diagnostic scanner. The scanner cable ends goes in only one way. You will know which end goes into which port when fitting the first end into the diagnostic port.

  • Plug the diagnostic scanner power cord into a wall outlet or your vehicle's electrical outlet.

  • Press the power button on the scanner. Once the scanner is on, it will automatically detect the computer for your vehicle and erase the original program in the ROM chip. After the erasure, the scanner will load the new software that you received from the manufacturer into the chip. The updating process is displayed on the scanner's LCD.

  • Turn off the scanner, and detach the scanner cable and the power cord once the reprogramming is done on the vehicle's engine computer.

  • Replace the plastic diagnostic port cover as needed.

  • Turn on the car engine. Any false warning lights previously on will be off after a few seconds.

Tips & Warnings

  • Update or reprogram your vehicle's computer every three years to ensure its efficiency and normal functioning. This is important to California drivers, as California is one of the strictest regulatory states in the U.S. on vehicle emissions and operations. Vehicle tune-up service usually includes the reprogramming of the auto's computer; ask the mechanic if you're not sure.
  • Use only the newest software when reprogramming the computer. Software updates for your vehicle may occur every few years. Do not drag the desktop updating software icon onto the diagnostic scanner. The icon is just a shortcut to open the program; it does not contain the actual program files.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Reprogram Your Car Computer

    Dozens of performance computer-chip manufacturers offer products to modify the factory settings that are programmed into your car's computer. Drivers install computer...

  • Automotive Computer Reprogramming Tools

    Automotive reprogramming or re-flashing is the act of basically rebooting the automotive engine control modules (ECMs). ECMs are small computers built into...

  • How to Reprogram a Computer

    Automotive Computer Reprogramming Tools. Automotive reprogramming or re-flashing is the act of basically rebooting the automotive engine control modules (ECMs).

  • How to Reset a Car Computer

    If your check engine light keeps coming on after you have repaired your automobile, then this means the trouble code is still...

  • Car Computer History

    Computerized automotive systems are an ongoing evolution, continually improved from year to year to provide more efficient and more powerful cars. The...

  • How to Reprogram a Chevrolet PCM

    How to Reprogram Your Car Computer; How to Reprogram a PCM; Print this article; Things You'll Need. Chevrolet compatible scan tool; Serial...

  • Symptoms of a Faulty Auto Computer

    Modern automobiles rely on technology to complete a number of standard driving tasks. The ECM, or engine control module, is a common...

  • How to Reprogram a Computer When Changing Tire Size

    eHow; Car Repair & Maintenance; Emissions Controls Repair & Maintenance; Check Engine Light Codes; How to Reprogram a Computer When Changing Tire...

  • How to Disconnect a Car Battery to Reset the Computer

    If your check engine light comes on in your car, the first thing to come to mind is whether there is a...

  • How to Change the Keyless Entry Code for a Ford Escape

    Before an Escape leaves the Ford factory, ... The 2002 Ford Escape remote only works on the specific vehicle to ... How...

  • How to Reprogram a Car's ECM

    Automotive computer reprogramming tools allow you to update your computer system. a car in a car show image by Gary from Fotolia.com....

  • How to Reprogram an OBD2

    Introduced in the mid 1990's, the OBD2 in your car acts as the interface between your car's engine and the car's computer....

Related Searches

Read Article

How to Clean Your Car Headlights

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!