Unwanted tree stumps are unsightly blemishes in your yard that can be obstacles to proper landscaping. Accidentally mowing over roots from a low tree stump can damage your lawn care equipment. Killing the tree stump makes it easier to remove completely at a later date. Overdosing the stump with salt will effectively kill the stump.
Things You'll Need
- Electric drill
- Drill bit, 1 1/2 inch
- Rock salt
- Duct tape
Attach a 1 1/2 inch drill bit to an electric drill.
Drill a series of holes into the top of the tree stump. Make each hole on a 30- to 45-degree angle and 10 inches deep. Space the holes 2 inches apart in a circle around the top of the stump.
Repeat the drilling on the side of the stump. Make the holes the same depth and angle, and space them 2 inches apart in a ring around the stump.
Pour rock salt into each hole until the hole is full.
Cover each hole with duct tape so rainwater does not dissolve the salt.
Check the holes in two weeks. If the salt level has lowered, refill the holes. Repeat this until the stump is dead.