Smell From an Electric Baseboard Heater

Save

Smells from electric baseboard heaters are usually the result of accumulated dust that is being heated. This unpleasant odor usually appears immediately after the heat comes on, particularly after an electric baseboard heater has not been used for a season. The smell may be barely noticeable or overpowering, depending on the amount of dust in the unit and the contents of the dust. The smell of burned hair, for example, usually indicates that pet hair or human hair is trapped in the heater along with the dust.

Things You'll Need

  • Vacuum
  • Screwdriver
  • Damp cloth
  • Soft brush
  • Turn off the heat immediately after you notice the smell. Allow the electric baseboard heater to cool off.

  • Take the cover off of the baseboard heater. Typically, there will be one to two small screws on each end of the heater that hold the cover in place. Remove these screws using a screwdriver and gently lift off the cover. If the cover simply snaps on, gently remove it and place it aside.

  • Once the cover is off of the electric baseboard heater, the heating element will be exposed and you should be able to see how much dust has accumulated on it. Clean the heating element with a vacuum or damp cloth.

  • Remove dust located under the heating element or in any other hard-to-reach areas with a damp toothbrush.

  • Clean off the underside of the cover with a damp cloth before reassembling the heater. Replace the cover and reattach any screws.

Tips & Warnings

  • You may need to repeat this process in all rooms with baseboard heating to eliminate the smell.
  • A strong burning smell that persists even after you clean your electric baseboard heater may indicate a serious malfunction. Shut off the unit immediately and contact a heating repair specialist.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!