Plan the perfect garden with our interactive tool →

How to Stack Pavers

Jupiterimages/Photos.com/Getty Images

Stacking pavers to edge a garden or walkway adds definition and style to your landscape. Pavers are a durable material that creates an attractive, uniform look to contrast the colors and textures of plants. Stacked pavers retain soil in raised flower beds and prevent grass from encroaching. Use interlocking pavers if you plan to stack more than three levels to ensure the wall's strength and stability.

Use a hose or flour to outline the area where you plan to stack pavers. If you're building a garden wall, for example, the width of the wall will be the length of the pavers you are using plus 6 inches.

Dig out the grass and soil with a spade or flat shovel. Continue digging until the surface is deep enough to submerge the first row of pavers, plus 5 inches. If you live in a cold climate, consider digging below the frost line to prevent frost heave damage.

Compact the surface with a compactor machine or tamping tool until it is even. Pour a 4-inch layer of gravel over the surface and compress the gravel to improve drainage and prevent the foundation from shifting.

  • Use a hose or flour to outline the area where you plan to stack pavers.

Place landscape fabric over the gravel to inhibit weeds, and pour a 1-inch layer of sand over the fabric.

Lay the first course or row of pavers, aligning the connection arrows with the interlocking joints or pressing them snug as you go. Tap the pavers with a rubber mallet to press them firmly into the sand. Backfill any gaps between the pavers and the soil with gravel.

Place the second course of pavers with half bricks on the ends. The half bricks will offset the pattern of the pavers so that each paver overlaps interlocking joints beneath it. This laced look adds stability to the wall. You can either purchase half pavers for this purpose or cut pavers in half with a hammer and brick chisel.

  • Place landscape fabric over the gravel to inhibit weeds, and pour a 1-inch layer of sand over the fabric.
  • Tap the pavers with a rubber mallet to press them firmly into the sand.

Continue to stack courses of interlocking pavers until you reach the desired height of your wall. If the wall is intended to retain soil, lean the stack 1 inch for every foot of height for extra stability.

Related Articles

How to Use Pavers As Stair Landing
How to Use Pavers As Stair Landing
How to Build a Brick Bench
How to Build a Brick Bench
How to Install Pavers for a Grill
How to Install Pavers for a Grill
How to Build a Path in the Garden Using Sand
How to Build a Path in the Garden Using Sand
How to Make a Stone Waterfall
How to Make a Stone Waterfall
How to Build a Bark Mulch Path
How to Build a Bark Mulch Path
How to Make Steps in a Garden Slope
How to Make Steps in a Garden Slope
How to Set Stone Pavers With Mortar
How to Set Stone Pavers With Mortar
How to Calculate a Stone Retaining Wall
How to Calculate a Stone Retaining Wall
How to Build a Raised Patio Stone
How to Build a Raised Patio Stone
How to Repair a Settling Sidewalk
How to Repair a Settling Sidewalk
How to Install a Crushed Rock Patio
How to Install a Crushed Rock Patio
How to Install Metal Lawn Edging
How to Install Metal Lawn Edging
How to Build a Brick Driveway
How to Build a Brick Driveway
How to Install a Flagstone Driveway
How to Install a Flagstone Driveway
How to Use Granite Around a Fire Pit
How to Use Granite Around a Fire Pit
Garden Guides
×