How to Troubleshoot a Misting Fountain


A misting fountain is a great way to release aromatherapy into the air and to just plain relax after a long day at the office. When up and running with the LED lights glowing and mist flowing across the bowl, the misting fountain takes on an ethereal quality. Misting fountains are relatively simple devices and the problems are few. Issues you may encounter have to do mostly with the ceramic disc, LED lights, or water that has become dirty or contaminated.

Things You'll Need

  • disk key tool
  • soft cloth
  • Check that the water level is above the water sensor and extends above the mister unit if the LED lights work but the unit is not misting.

  • Remove and clean the ceramic disk at the base of the fogger if the water level is OK and the unit is still not misting. Unplug the mister and allow the mist maker unit to completely dry before removing the ceramic disk from the water container. Insert the disk key tool that came with the unit into the winding ring and turn it counter-clockwise. Take note of the spring beneath the ceramic disk. Clean any deposits, or build-up on the disk with a soft cloth. Reverse the process to reinstall the disk. Take care to reinstall the disk with the black ring down. The ceramic disk cavity should be completely dry before reassembling. The use of too much aromatherapy oil, or dirty water, can cause the ceramic disk to deteriorate. Replace the disk if necessary.

  • Run the misting unit for approximately 8 hours per day, but no longer. This will prevent burn out and extend the life of your mister. If possible, use a timer on the unit.

  • Place your mister in an area where water droplets, or mist, can not cause damage to nearby furniture. A small amount of mist will flow over the sides of the unit.

Tips & Warnings

  • If the mister works but the LED lights do not you may need to have the mist maker unit replaced.
  • Use only a few drops of aromatherapy oil at a time to prevent the ceramic disk from deteriorating.
  • The ceramic disk will generally last for a few months of use before needing replacement.
  • The misting units range from $20 - $40 and there are a number of manufacturers that carry them.
  • Replacement of the ceramic disk is the least costly remedy. They generally cost between $10 - $15.

Related Searches


Promoted By Zergnet


You May Also Like

  • Mist Maker Instructions

    A Mist Maker adds ambiance to a Halloween party and can even keep garden plants hydrated. The Mist Maker produces a billowing...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!