Refrigerators and freezers are responsible for about 17 percent of all the electricity used in American homes, according to the California Energy Commission. The compressor is the most power-hungry component in a refrigerator. Apart from the internal light, the compressor may be the only component drawing current. Testing the amp draw is a straightforward process requiring the ability to use a current meter and to read a digital display. Knowing the amp draw may help with household budgeting.
Things You'll Need
- Clamp-on ammeter
Gain access to the point where the power cord connects to the refrigerator. If the conductors are bundled with other wires, separate one conductor wire and keep it isolated. Currents flowing though wires running in close proximity to the one under test may influence your readings.
Set a clamp-on ammeter to "auto-range" or to the appropriate current range if auto-range is not available. Open the clamp jaws by depressing the "Open" button. Place one conductor from the refrigerator cord between the jaws and close them gently, positioning the conductor in the center of the jaws.
Observe the display on the meter. It may take a few seconds to register a reading. With the compressor switched off, the reading will be very low. Wait until the compressor turns on, and observe the new reading. Subtract the original reading from the second reading to find the current drawn by the compressor.
- Photo Credit Jupiterimages/Photos.com/Getty Images
How to Calculate Full Load Amperage
Certain appliances, such as refrigerators and air conditioners, require the calculation of what is known as full load amperage. One calculation is...
How to Test an HVAC Compressor
The compressor acts as the main cooling element for your HVAC unit. The compressor is responsible for raising temperature, density and refrigerant...
How to Check Amperage on a Refrigerator
Everyone wants to reduce their electricity bill, but it's a difficult thing to do if you don't know how much electricity your...