How do I Disconnect the Theft Warning System in a 1993 Infiniti G20?

Save

The anti-theft system in the Infiniti G20 operates via a remote key fob. You must disable the system before completely disconnecting the alarm. Simple wiring work is all that is needed to finalize the disconnection.

Things You'll Need

  • Alarm key fob
  • Ignition key
  • Flathead screwdriver
  • Wire cutters
  • Wire caps
  • Wire Crimpers
  • Press the button on your alarm key-fob that deactivates the alarm. Press the "unlock" button if your G20 has keyless entry. Manually unlock the driver's side door -- this deactivates the alarm -- if you've misplaced your key fob.

  • Open and secure the hood of the car. Gently pry the negative battery cable off the terminal, using a flathead screwdriver. Move the cable aside so that it doesn't come into contact with any metal. Disconnecting the battery cable completely disables the alarm, allowing you to work on it.

  • Pull the panel off the theft module. It is located under the driver's side of the dashboard, near the steering column.

  • Use wire cutters to cut the green and yellow wire. Slide a wire cap onto both ends of the wire. Secure the cap in place using wire crimpers.

  • Replace the negative battery cable, and close the hood of the car.

Tips & Warnings

  • Never work on any wiring with the car battery connected.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!