How to Upload From a Telstar 10 to a Coolsat 4000 Pro
Telstar 10 is a FTA satellite dish used to obtain satellite signals and send the received information to a satellite receiver. You can use any FTA based satellite receiver to produce the received signals. This includes a Coolsat 4000 Pro. Once connected, the Telstar 10 uploads the programming information to the Coolsat receiver, which when connected to a TV produces the FTA satellite content on the TV.
Other People Are Reading
Instructions
-
-
1
Plug the cable running from the Telstar 10 into the "In" port on the rear of the Coolsat 4000 Pro receiver.
-
2
Insert the component video cables into the "Component Out" ports on your receiver. Plug the free ends of the cables into the "Component In" ports on the TV.
-
-
3
Plug the RCA audio cables into the "Audio In" ports on the TV, and then plug the other ends into the "Audio Out" ports on the receiver.
-
4
Power on the TV and the Coolsat 4000 Pro receiver. Select "Component Video" as the display source on the TV. The Telstar 10 content now loads onto the screen.
-
1
References
- Photo Credit tv control and tv 3 image by chrisharvey from Fotolia.com
