How to Paint a Checkerboard Table

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Use masking tape and paint to create a DIY checkerboard game table.
Image Credit: Carrie Waller

Family game night is a tradition that people of all ages can enjoy. All you need to transform an everyday side table into a game table fit for checkers (or chess) is simply paint, masking tape and wooden discs to make your own game pieces.

Advertisement

Assemble Your Table

Video of the Day

Assemble your side table.
Image Credit: Carrie Waller

If you've purchased a new table for the project, assemble it according to its manufacturer's instructions with the help of a basic tools, such as pliers and screwdrivers.

Advertisement

Video of the Day

Measure and Mark the Game Board

Calculate the size of your game table and measure and mark the board area.
Image Credit: Carrie Waller

You'll need a little math to determine the measurement of your game board squares. In this case, the squares were 1 1/2 inches by 1 1/2 inches, making the game board measure 12 inches based on an 8-squares-by-8-squares board. Because the table itself measured 21 1/2 inches square, the game board would sit inset 4 3/4 inches on all four sides. Make two marks using a pencil on each of the four sides, 4 3/4 inches from the edge and about 6 inches apart.

Advertisement

Complete the Game Board Perimeter

Connect the marks with a ruler and pencil to finish the game board perimeter.
Image Credit: Carrie Waller

Go back with a straightedge and pencil to connect the two marks along all four sides to denote the completed game board perimeter.

Advertisement

Finish the Game Board Grid in Pencil

Measure and mark the widths of the game board squares and then connect the marks to complete the grid.
Image Credit: Carrie Waller

Line up a ruler on each of the four outside lines of the board and make marks with a pencil every 1 1/2 inches. Then use a straightedge to connect the top marks with the bottom marks and the left marks with the right ones. This completes the foundation of the game board.

Advertisement

Advertisement

Paint the First Set of Squares

Lay down masking tape according to the grid and paint the squares white.
Image Credit: Carrie Waller

Use painter's tape to mask off the first section of squares in the grid. Match the width of your tape to the width of your desired squares to make things easier. So, in this case, the painter's tape was already 1 1/2 inches wide. Paint the exposed squares white using acrylic or chalk paint with a foam paintbrush. You will need to paint two to four coats, depending on your paint. Remove the tape immediately and allow the paint to dry overnight.

Advertisement

Paint the Second Set of Squares

Tape over the first set of squares and paint the second set of checkerboard squares white.
Image Credit: Carrie Waller

Lay masking tape down again, this time right on top of the first set of gridded painted squares. This will leave exposed the second half of gridded game board squares. Press your fingertips firmly over the tape to ensure even lines in the end, and then paint another two to four coats of white paint on the newly exposed squares. Remove and discard the tape, and allow the game table to dry overnight.

Advertisement

Paint Your Game Pieces

Paint two sets of wooden craft store discs in coordinating accent colors.
Image Credit: Carrie Waller

Paint 24 wooden discs in two coordinating colors (12 in each color) using a foam paintbrush and either acrylic or chalk paint. These are your game pieces. Allow the painted discs to dry overnight.

Advertisement

Play a Game of Checkers

When the game pieces are dry, put them in place on the game table and enjoy.
Image Credit: Carrie Waller

When everything is dry, lay the game pieces in place on the game table and enjoy your first game of checkers on the newly crafted table. When not in play, put the game pieces into a box or drawer, and place coasters on the table for everyday use.

Advertisement

resources

Report an Issue

screenshot of the current page

Screenshot loading...