Whirlpool Jacuzzi Instructions

Always monitor children if you let them use a Jacuzzi tub.

Whirlpool Jacuzzi tubs are designed for home use and incorporate jets inside the tub to provide agitation to the water, creating a hot-tub-like environment. Jacuzzi tubs are available for purchase online and in many home supply stores and are available in a wide variety of shapes, sizes and finishes. Fill the bath tub with clean water for every use, and allow the water to rise at least 1 inch above the top jet if you plan to use the jets. The Jacuzzi tub should be operated only by adults for safety reasons.

Things You'll Need

• Mild household cleaner
• Clean cloth(s)

Instructions

1. Close the drain on the tub, and turn on the water faucets to the desired water temperature. Allow water to the fill the tub to at least 1 or 2 inches above the highest jet inside the tub.

2. Press the "On/Off" button on the control panel located on the top side of the tub to turn on the jet motor. This will turn the motor on to "High." Use the up and down arrow buttons to adjust the jet speeds to a higher or lower level.

3. Adjust each jet with your fingers to change the direction and force. Turn the jets counterclockwise to set the jets to full force, and turn the jets clockwise to reduce the water force.

4. Press the button with the light bulb image to turn the interior bath lights on or off.

5. Press the "On/Off" button to turn off the jets when finished. Always turn the jets off prior to draining the water from the tub. Drain all the water from the tub. Clean the tub on a regular basis with a non-abrasive household cleanser and a soft cloth. Rinse well.

References

• Owner IQ: Jacuzzi Whirlpool Tub User Manual