How to Hook Up a Child Bike Trailer to a Bike

Save

Child bike trailers attach to the back of an adult bike. They allow a child to sit comfortably in a seat that is inside of the trailer. The seat contains safety straps and padding to protect the child. Safely attach this wheeled device to the back of your bike so you can enjoy some recreational time with your youngster. The trailer does not have to be hooked to a specific type of bike.

Things You'll Need

  • Adjustable wrench
  • Loosen the connection between the axle of the bike's back wheel and the frame of the bike. Loose the screw on the end of the axle by turning it counterclockwise with an adjustable wrench. If you have a quick release wheel, lift the arm of the quick release away from the wheel of the bike. Don't take the wheel off of the bike.

  • Connect the front-most part of the trailer to the back axle of the bike. Slide the bracket on the front of the arm of the trailer over the back axle of the bike.

  • Secure the back wheel of the bike to the frame. Tighten the bolt on the end of the axle that you previously loosened. If you have a quick release wheel, press the arm of the quick release device toward the wheel.

  • Attach the safety strap of the trailer to the bike. Locate the strap that is on the arm of the trailer. Wrap this strap around the frame of the bike and back toward the trailer. Fasten the strap to the trailer. This is typically a snap connection. Press the snap on the strap to the corresponding snap button piece on the trailer.

Tips & Warnings

  • Place a helmet on the child that is riding with you.
  • Watch for traffic and other obstructions. The trailer is low to the ground and it is not as visible as you are on a bike. Also, bumps in the road can cause the trailer to jump.

Related Searches

References

  • Photo Credit bike image by Dubravko Grakalic from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!