×
Back Button

How to Make a Stained Glass Tabletop

Katharine Godbey

Making a stained glass tabletop is easier than creating traditional stained glass, in which lead is placed between the cut glass and then soldered into place. Because lead is not safe around children, pets or food, grout can be used to make stained glass tables.

Stained glass turns a tabletop into a one-of-a-kind work of art.

This also remedies the problem of sagging that would occur with a soldered stained glass design. Stained glass tabletops transform simple tables into exceptional accent pieces for a home.

  1. Measure and cut the heavy paper to the same dimensions as the table’s top.

  2. Draw the design pattern onto the heavy paper. For design ideas, use mosaic and stained glass patterns for inspiration (see Resource).

  3. Measure and cut the stained glass to fit onto the drawn design. Be sure to wear safety glasses. Lay the pieces on top of the design as you cut the glass and space the pieces approximately 1/4 inch apart.

  4. Apply a thin layer of tile adhesive to a small section of the table’s surface and begin placing the glass in the same pattern as on the paper. Use the design pattern as a reference.

  5. Continue applying more tile adhesive as needed until the entire stained glass pattern as been placed on the table surface. Allow the adhesive dry before proceeding to the next step.

  6. Use a trowel to apply the grout over the entire table surface. Be sure to fill in all the areas between the stained glass pieces.

  7. Wait about 30 minutes until the grout’s appearance becomes cloudy. Dampen the sponge with water and wipe away the excess grout. Allow the grout to dry completely, about 1 to 2 days.

  8. Apply a coat of grout sealant and let it dry. Apply a second coat. This sealant protects the grout from staining.

  9. Tip

    Protect the stained glass by placing a piece of tabletop glass over it. Use leftover scraps from other stained glass projects or pre-cut glass used for mosaic crafts. If you desire a more finished table edge, apply pieces of glass along the edge and grout it along with the tabletop design.

    Warning

    Be careful cutting glass and working with sharp edges to prevent cuts.