How to Make Purse Handles With Piping

Save

Purses and handbags are more than a way for women to carry their personal belongings; they are fashion statements. Women often accessorize with a purse or handbag that matches an outfit or a particular event theme. Customize your own purse or handbag with handles made of rubber tubing or cloth piping.

Things You'll Need

  • Premade purse
  • Seam ripper
  • Measuring tape
  • Clear rubber tubing
  • Scissors
  • Yarn, ribbon or fabric strips
  • Masking tape
  • Large darning needle
  • Thread
  • Premade cloth piping
  • Piping filler
  • Steam iron
  • Straight pins

Clear Plastic Tubing Purse or Bag Handles

  • Remove the straps from the premade purse. Use a seam ripper to remove the threads holding the straps in place. Once the threads are removed, the straps or handles will easily come off the purse.

  • Measure and cut two lengths of clear rubber tubing. Handles and straps vary in length; for instance, cut handles 14 inches in length for a hobo-style purse or 24 inches in length for a shoulder bag. Clear rubber tubing is available at aquarium, hardware and craft stores.

  • Cut two lengths of yarn, ribbon or fabric strips 2 inches longer than the rubber tubing. For instance, if the purse handles are to be 14 inches in length, cut the yarn, ribbon or fabric strips 16 inches in length.

  • Wind masking tape tightly around the end of the yarn, ribbon or fabric strip so that the edge is stiff and straight.

  • Cut a length of thread 6 inches longer than the clear rubber tubing. For instance, if the purse handles are 14 inches in length, cut the thread 20 inches in length.

  • Thread 3 inches through the eye of the needle, then make a large knot at the tip of the long end of the thread.

  • Pierce the needle through the taped end of the yarn, ribbon or fabric strip, pulling it through so that the knot of the thread stops at the taped end of the yarn, ribbon or fabric strip. Loop it once and re-pierce through the same spot, pull the thread through again and pull it tight.

  • Hold the clear rubber tubing vertically so that both ends are open. Drop the needle through the top end of the tubing followed by the thread; the needle will come out the bottom end of the tubing.

  • Grab the needle from the bottom end of the tubing and gently pull the thread through, followed by the yarn, ribbon or fabric strip until there is an equal amount of yarn, ribbon or fabric strip hanging from both ends of the rubber tubing.

  • Squeeze closed one end of the clear rubber tubing and using the scissors, cut a 1/2-inch split into each of the folded edges, then repeat on the opposite end of the plastic tubing. The splits will make the rubber tubing less bulky and easier to attach.

  • Pin each end of each handle to opposite ends of each side of the opening of the purse with an arc in between them. The handles should be evenly spaced so when the purse is closed, both are exactly in the same position on each side of the purse. If you are replacing straps or handles, use the openings in the purse that held the old straps to place the new ones.

  • Sew the handles or straps on either with a needle and thread by hand, or with a sewing machine. If a sewing machine is used, the tension will need adjustment to accommodate for the thickness of the clear rubber tubing.

Premade Piping Purse or Bag Handle

  • Measure and cut two lengths of premade cloth piping. For instance, if a hobo style bag is being made, cut 14 inches in length; for a shoulder bag, 24 inches.

  • Pin each end of each handle to opposite ends of each side of the opening of the purse with an arc in between them. The handles should be evenly spaced so when the purse is closed, both are exactly in the same position on each side of the purse. If you are replacing straps or handles, use the openings in the purse that held the old straps to place the new ones.

  • Sew the straps or handles on either with a needle and thread by hand, or with a sewing machine. If a sewing machine is used, the tension will need adjustment to accommodate for the thickness of the cloth piping.

Homemade Fabric Piping Handles or Straps

  • Cut two lengths of fabric piping filler the desired length of the purse handles. For instance,14 inches for a hobo style purse or 24 inches for a shoulder bag. Piping filler comes in many sizes; a common size for purse handles is 1 inch in circumference.

  • Cut two lengths of fabric; make sure it is wide enough to cover the circumference of the piping filler you are using, adding 2 inches to allow for folding and sewing. For instance, if the circumference of the piping filler is 1 inch, the cut fabric should be 3 inches wide by 14 inches in length.

  • Lay the fabric out with the wrong side up. Using an iron, fold over 1/2 inch on both edges of the wide side of the fabric and iron them flat. This makes it easier to pin the fabric around the piping filler for sewing.

  • Place the piping filler onto the fabric, then roll the fabric over the cording so that both flatly ironed folds meet each other evenly on one side.

  • Pin the two folded edges together around the cording, 1/2-inch apart all the way down the length of the cording handle horizontally to the cord and the folds.

  • Sew the edges of the fabric together as close as possible to the piping filler, removing the pins as you go.

  • Pin each end of each handle to opposite ends of each side of the opening of the purse with an arc in between them. The handles should be evenly spaced so when the purse is closed, both are exactly in the same position on each side of the purse. If you are replacing straps or handles, use the openings in the purse that held the old straps to place the new ones.

  • Sew the handles or straps on either with a needle and thread by hand, or with a sewing machine. If a sewing machine is used, the tension will need adjustment to accommodate for the thickness of the cloth piping.

Related Searches

References

  • Photo Credit girl with purse image by Dmitri MIkitenko from Fotolia.com gel tubing macro image by laurent dambies from Fotolia.com ribbon rolls image by TekinT from Fotolia.com scotch image by MATTHIEU FABISIAK from Fotolia.com measuring tape image by MichMac from Fotolia.com needle and thread image by Nikolay Okhitin from Fotolia.com colors of yarn image by VisualEyez from Fotolia.com pins image by dinostock from Fotolia.com Sewing machine image by Susanne Karlsson from Fotolia.com scissors image by dinostock from Fotolia.com sewing image by Aleksandr Ugorenkov from Fotolia.com needle image by Radu Razvan from Fotolia.com store display of fabric image by Joyce Wilkes from Fotolia.com iron image by Eray Haciosmanoglu from Fotolia.com sewing box image by Edsweb from Fotolia.com Sewing Machine Needle image by C Agoncillo from Fotolia.com sewing kit image by Christopher Hall from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Make Handbag Handles

    Having the right handles for your handbag project can make it stand out. Handbag handles can be purchased and attached to your...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!