How to Paint Suspension Springs


Though the suspension springs are not the most noticeable aspect of your car because they are hidden behind the wheels and under the car, they still look great with a fresh coat of paint. If you are restoring a car mechanically and rebuilding the suspension to look like new, then repainted and restored suspension springs should be considered part of the restoration process. Painting springs is quite easy once they are out of the vehicle.

Things You'll Need

  • Socket set and ratchet
  • Miscellaneous tools to remove springs
  • Paint stripper
  • Mineral spirits
  • Rags
  • Spray primer
  • Spray paint
  • Remove the springs from the vehicle if they are still installed. The procedure will vary depending on the vehicle they are being removed from. Consult a workshop manual for your vehicle.

  • Strip the old paint from the springs if they are painted. Apply the paint stripper in either brush-on form or from an aerosol can. Allow the paint to begin bubbling and then wipe the paint off with a rag. Steel wool can be handy for removing more stubborn areas of paint.

  • Wipe all surfaces of the spring with mineral spirits and a clean, dry rag until all oil and residue is removed from the spring.

  • Apply a light coat of spray primer. Spray about eight to 10 inches from the spring in a smooth back and forth motion. Allow the light coat to dry for a minute or so. This coat will give the heavier coats something to adhere to. Apply two solid coats of primer, allowing 10 to 15 minutes between coats. Let the primer dry fully. Consult the directions for the drying time of the brand you are using.

  • Apply a light coat of spray paint in the color of your choice. Allow the paint to dry for a minute or so and then apply two to three solid coats, allowing adequate drying time between coats according to the directions on the can. Allow the final coat to dry overnight before attempting to handle and reinstall the springs in the vehicle.

Tips & Warnings

  • Common colors for springs are black, blue, red or yellow. There are also specialty spray paints being produced now that are made specifically for suspension parts and that provide a more durable finish. Check with your local auto parts stores for a selection of paint.

Related Searches

Promoted By Zergnet


You May Also Like

  • Types of Vehicle Coil Springs

    Most modern light vehicles employ coil springs in their suspension systems. A coil spring, known also as a helical spring, is a...

  • How to Paint Plastic Auto Parts

    Painting plastic auto parts requires different preparation and products than painting a car's sheet metal. Plastic auto parts may include trim pieces,...

  • How to Replace a Grandfather Clock Suspension Spring

    Grandfather clock suspension springs are designed to support the pendulum of the clock while allowing it the necessary freedom of movement it...

  • How to Paint Coil Springs

    Because of their vulnerable place in the suspension, springs are exposed to a lot of dirt, moisture and mud over the course...

  • How to Cut Coil Springs to Lower a Truck

    Lowering a truck's suspension can have several benefits, chief amongst them better handling. By lowering the suspension, the center of gravity is...

  • Custom Car Paint Ideas

    Custom car enthusiasts have been known to customize everything from the suspension and wheels to the interior and engines of their cars....

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!