How to Remove the Sash on a Narroline Anderson Window
Narroline windows by Andersen are double hung, with a natural wood interior and vinyl cladding on the exterior. They have dual-pane insulating glass with Low-E. These windows are available in many different sizes and you have the option of replacing only the window sash without removing the entire frame. The first step toward replacing the sash is removing the old one. This is a job any homeowner can handle in only a few minutes with just a couple of tools.
Other People Are Reading
Instructions
-
-
1
Remove the sill stop located along the sill. Locate the screws holding the sill in place and unscrew them with a screwdriver. Pull up on the sill very carefully so it does not break and remove it from the sealant holding it in place. Cut along the sealant with a utility knife if necessary.
-
2
Unlock the window and lower the top sash all the way to the bottom. Take out the two screws on the upper-left jamb liner. Raise the sash back up and remove the screws on the lower-left jamb liner. Hold the lower-left jamb liner in place and pull out on it to remove it from the jamb
-
-
3
Remove the lower sash by closing the lower sash completely. Pull out the left side and hold the sash in position. Pull the sash cord tab out and pull down on the left-hand sash cord. Move the sash cord up into the head jamb. Follow the same steps for the right-hand sash cord and remove the upper sash.
-
4
Remove the upper sash by pulling out the left side of the sash and keeping it in position. Pull and hold the sash cord tab and pull down on the left-hand sash cord. Slide the sash cord to the head jamb and do the same for the right-hand sash cord. Turn and pull the sash out.
-
1
