Cyklop C-25 Operating Instructions
If you send a lot of packages as part of your business, you know how hard it can be to secure each box to make sure the contents won't fall out, or that the box won't come open during shipping. The Cyklop C-25 is a tape-dispensing machine that applies sticky adhesive to tape, giving it the extra holding power needed so you can tape up tricky boxes and keep everything inside during handling.
Other People Are Reading
Instructions
-
-
1
Press and hold the green button, and pick up the water tank with your free hand. Insert the tank into the machine, placing the pivot into the hole inside of the machine's housing. Turn the tank clockwise until it touches the rear of the machine. Push the tank down until you hear a click, and release the green button.
-
2
Place the heating unit into the water tank in the brackets near the top of the tank. Fill the water bottle with drinking water and cover the hole with a thumb or finger. Do not drop any water on the machine. If you do, wipe it dry with a towel. Place the bottle into its holder on the side of the water tank.
-
-
3
Pull the guides for the tape dispenser apart until they are wide enough to hold the tape you plan on using in the machine. Stick the end of the roll of tape you are using through the guides, with the side you wish to be sticky facing down. Place the roll of tape into the bracket on the end of the machine to mount it. Insert the moving plate into the front of the machine; slide the end of the tape under the plate and into the machine.
-
4
Connect the power cord of the machine into a wall outlet and flip the "Power" switch to turn the machine on. Press the button on the control panel that best fits the length of tape you need, and the machine will dispense it. Pressing and holding the green button will produce tape until the button is released.
-
1
