When you take your office space and add decorations and a personal sense of style, you make that space feel like your own. Turn your office chair into a seat of inspiration after you learn how to sew a slipcover for an office chair -- in a few steps. Cover the back of the chair and the seat, or just do the back by itself; with basic sewing skills you can make a slipcover for your desk chair that will have all your co-workers feeling jealous.
Things You'll Need
- Measuring tape
- Home decor-weight fabric
- Scissors or rotary cutting tool
- Iron and ironing board
- Straight pins
- Sewing machine
- Screwdriver (optional)
- Staple gun (optional)
Measure the height and width of your chair back; if the chair back has thickness to it, divide that in half and add that to the width measurement as well.
Add 1 inch to your height and width measurements, and then cut two pieces of home decor-weight fabric to match these measurements.
Fold up the bottom of each piece of fabric by one-fourth inch toward the wrong or back side and press, then again by another one-fourth inch, and press again. Use straight pins to hold this hem in place, and sew along the bottom edge with a straight stitch.
Position the two pieces of fabric together with right sides facing, lining up the bottom edges you just hemmed. Sew a straight seam around the top and sides of the pieces, leaving the bottom edge open entirely. Position your straight seam approximately one-half inch from the edges of the fabric.
Clip the corners of the fabric at the top, outside your stitching line, so that you don't cut your seams. Turn the fabric pocket you have just made right side out, and slip it down over the back of your office chair.
Remove the base of the seat from the seat frame, if possible. Sometimes you can unscrew the seat underneath so that the seat cushion comes off; other times this isn't possible, so leave it as it is.
Cut a piece of fabric that is approximately four inches wider and taller than the dimensions of the seat cushion. Drape the fabric over the seat cushion, and center it.
Wrap the edges of the fabric around the seat so that the edges come underneath the cushion. If you have removed the cushion, the easiest way to do this is to put the fabric right side down on a table and then place the cushion upside-down on top of it. If you keep the cushion in the chair, then just turn the chair upside down as much as you can to facilitate this process.
Staple the edges of the fabric to the underside of the cushion using a staple gun. If you don't have a staple gun, you may be able to use sturdy glue for this step or even heavy-duty duct tape. Secure the edges of the fabric all under the cushion, and you will have a new slipcover for both portions of your office chair.
Tips & Warnings
- If you are recovering your own personal chair, complete both sections of this tutorial. If your chair belongs to your company, simply complete Section 1 so that you can return the chair in its original condition, as the slipcover is removable.
- Photo Credit Ryan McVay/Photodisc/Getty Images
How to Make an Office Chair Cover
When your office chair fabric begins to wear out, you don't have to throw the chair away. Instead, make a cover for...
How to Make Slipcovers for Chairs
Slipcovers keep chairs clean, increasing their lifespan and appearance. You can make slipcovers to coordinate with different holiday schemes, room colors and...
How to Make Slip Covers for a Captain's Chair
Captain's chairs are mid-size wooden chairs with vertical supports serving as a back rest and a horizontal support serving as the arm...
How to Make Slipcovers for a Computer Chair
If you have a perfectly good computer chair, but its bland style or even ugly look doesn't fit in with your decor,...