How to Clean a Pfaff Sewing Machine 7570
A heavy-duty sewing machine functions perfectly for years if properly maintained. A sewing machine may need small adjustments and repairs as it ages; however, it rarely wears out entirely. Basic sewing machine maintenance includes cleaning, oiling and lubricating its components and mechanisms. Use the maintenance manual provided with your sewing machine for specifications on how to properly conduct these procedures. Some sewing machine do not require oiling or lubrication, such as the Pfaff 7570 series. The Pfaff 7570 sewing machine model follows the same cleaning principles relevant to its standard design.
Instructions
-
-
1
Disconnect the sewing machine's main plug from the outlet. Wipe the sewing machine's exterior surface with a dry, soft cloth to remove dust, dirt and lint collections. Do not use cleaners or solvents on the plexifront. Use a clean, soft and damp cloth to wipe down the Pfaff 7570 screen.
-
2
Apply up-and-down pressure to the foot presser in order to lower the feed dogs. Press the level at the top of the presser foot and remove the presser foot by pushing down on the presser foot shaft.
-
-
3
Dislodge the sewing needle with the needle remover accessory that came with your Pfaff 7570 sewing machine. Place the needle remover under the stitch plate and gently turn the needle remover clockwise to pop off the stitch plate. Use an accessory brush to clean the feed dogs.
-
4
Remove the bobbin case holding by lifting up on the hinge attached to it. Remove the bobbin case by lifting up on its lever. Use the accessory brush to clean the bobbin of accumulated dust, dirt and lint. Be careful when cleaning the thread snips knife. Snap the bobbin case and bobbin case holding back into place. Do not blow compressed air into the bobbin case area because dust, dirt and lint will retract back into the sewing machine.
-
5
Re-attach the feed dogs, needle and presser foot.
-
1
References
- Photo Credit sewing machine image by Peter Baxter from Fotolia.com
