How to Build a Dog Ramp for a Car
As dogs age, they might need a little help reaching high places, such as a bed, chair or car. A dog ramp is a moderately difficult task that takes preparation and the right supplies, but it can be done as a do-it-yourself project to save you money.
Other People Are Reading
Things You'll Need
- 1/4"-thick plywood
- Measuring tape
- Screws
- Screwdriver
- Staple gun
- Staples
- Hammer and nails
Instructions
-
-
1
Measure the distance from the car to the ground, then add 4 inches to the length. Cut the plywood to this length.
-
2
Lay another piece of plywood on the ground, place the screws into the wood and screw them in.
-
-
3
Attach indoor/outdoor carpeting to the plywood and cut to the length of the ramp. Attach the carpeting to the ramp using a heavy-duty stapler.
-
4
Place the ramp onto the car and have your pet try to climb it. If your dog needs additional help, wood lath strips can be added at 11-inch intervals for your dog to use as grips.
-
1
