How to Start a Power Washer
A power washer is a machine that uses highly pressurized water to clean large surfaces. Pressure washers convert water from your hose into a powerful spray. Power washers must be started properly to prevent air bubbles from damaging the system and to prevent drops in pressure. Properly starting a power washer is also important because you are likely renting the machine from a local hardware store. Reference the owner's manual before using the unit. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Hook your water hose to the bib on the outside of your home.
-
2
Screw on the pressure washer valve to the end of the hose. The pressure washer valve is, at this point, not attached to the pressure washer.
-
-
3
Open up the valve on the end of the hose and turn on the water by turning the faucet handle to the on position. Let water run through the hose to remove air. Close the valve to keep air from entering the hose.
-
4
Screw the hose to the pressure washer water intake connection.
-
5
Turn on the machine by turning the key to the on position or pressing the ignition switch. Let the water run through the machine until it stops sputtering.
-
6
Screw the end of your wand hose to the water outlet valve of the pressure washer. Let water flow through the hose for a minute or two.
-
7
Attach the wand to the end of the wand hose and test.
-
1
References
- Photo Credit Jupiterimages/Photos.com/Getty Images
