How to Identify a Spector Bass by the Serial Number

Save

Working out which model of Spector bass guitar you have can be very difficult if there are no clear indications on the bass itself. Learning the differences in the printing of the serial number can point you to an era in Spector’s production, which then can guide your search for your model. Stuart Spector released his first bass in 1977, the Spector NS-Bass, and many models have been made since then. Identifying your Spector bass model by the serial number is easy to do, but it more often revolves around the printing style than the number itself.

Spector basses normally have the serial number printed on the back of the headstock.
(bass guitar image by Wouter Tolenaars from Fotolia.com)
Step 1

Check the bridge on old-looking basses. The serial number on the original Spector basses was either engraved into the bridge, or written inside the control cavity. The earliest models had serial numbers that were based on the date. As a result, the year is easy to identify. These are part of what is termed the “Brooklyn Era,” which spanned from 1975 to 1985. The later models in this era, however, had sequential (not date-based) serial numbers printed in the wood on the back of the headstock.

Step 2

Look on the back of the headstock for a serial number on all other basses. As a result of Spector espousing a sequential serial-number system, the only way to tell different eras apart is by what is printed beside the serial number. Look for a serial number stamped with ink beside a “Made in USA” label to identify a bass as being from the “Kramer Era,” which was 1985 to 1990. The serial number on these models is often difficult to make out, because of the ineffective stamping method used.

Step 3

Check the headstock for Stuart Spector’s signature. This is only present on models made after 1991. These models are part of either the “SSD Era” or the current era of production. The “SSD Era” was 1991 to 1998. All of the models with Stuart Spector’s signature on the headstock also say “Woodstock, NY” on them. Aside from these details, these models also include a serial number — still sequential in construction — and a date. Next to the date, there is also a model number. This is the model of your bass. The model number will be something like NS-1 or SD-4.

Step 4

Visit the Spector website's Archived Import Model Sheets page (see Resources, below) for older import bass identification and additional information. Select the country of origin for your bass to view pictures for each model. This should help you identify your bass quickly.

Related Searches

Promoted By Zergnet

Comments

Resources

Related Searches

Check It Out

12 Tiki Essentials to Turn Your Bar Cart Into a Tropical Paradise

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!