The Water in My Whirlpool Dishwasher DU3000XR0 Will Not Fill

There may be a simple solution to a dishwasher not filling with water.

The Whirlpool DU3000XR0 is a portable dishwasher that has a removable pump guard, overflow protector, rack bumper to prevent the rack from falling out of the dishwasher during movement, and temperature and wash options. When the dishwasher is properly connected to a water and power supply, it should work well in general. However, if something goes wrong, such as if the dishwasher will not fill with water, some troubleshooting methods may be beneficial in finding a solution to the problem.

Instructions

1. Ensure the water faucet is turned on and the connection between the water and the dishwasher is secure. The hose connector should be snapped into place between the water faucet and the water hose.

2. Straighten the water hose and check for possible obstructions in the water hose, the water faucet and the hose connector. Clean as necessary. Turn on the faucet hot water slowly until it is all the way on to ensure proper water flow to the dishwasher.

3. Open and close the dishwasher door firmly. The dishwasher will not start a wash cycle if the door is ajar. Verify that the dishwasher is plugged in to a working power supply and that a wash cycle has been selected.

4. Avoid running other appliances that use water, such as a clothes washer, while the dishwasher is running, to avoid improper water pressure. This may result in a lack of water flow to the dishwasher.

5. Check to make sure large dishes, such as cookie sheets, pots or pans, are not blocking the spray jets. Avoid overloading the dishwasher.

References

• Whirlpool: Portable Dishwasher User Instruction Manual