How to Disconnect a VIP RS3000 Alarm

Toyota's factory alarm, the VIP RS3000, works like any other automotive alarm. When set, the alarm deters thieves by sounding the horns and flashing the lights if the vehicle is tampered with. If you choose to install an after-market alarm, lose your key fob or simply feel the alarm is too sensitive, then you need to disconnect the VIP RS3000.

Things You'll Need

• Key fob
• Ignition key

Instructions

1. Press the top button on your key fob three times to unlock the doors and deactivate the alarm. If you've lost your key fob, use the key to unlock the door.

2. Find the alarm box underneath the driver's side of the dashboard. Press and hold the button on the alarm box until you hear two chirps. This temporarily disables the alarm.

3. Look for the fuse panel under the dashboard and remove the cover. Look at the label on the back of the cover to locate the fuse connected to the alarm. Pull the fuse to disconnect the alarm completely.

References

• Toyota VIP RS3000 Instructions