How to Set Up the Wii With a Cable Box

Save

The Nintendo Wii gaming console features motion sensing controllers and is designed to provide a more active gaming experience. Setting up the system isn't complicated, but if you need to connect it through a cable box rather than your television, there are a few things you'll need to do differently.

  • Check your cable box for audio and video inputs. It will be labeled, and you'll see a yellow port labeled "Video" beside white and red ports labeled "Audio L" and Audio R."

  • Plug each of the three RCA plugs into the ports that match their colors.

  • Plug the other side of the AV cable into the AV Multi Out connector. This is located just above the power cord's spot.

  • Connect the Wii to a power supply and plug in its sensor bar.

  • Turn on your television.

  • Press the "Input" button on the cable box or television's remote control to switch the input from cable to the Wii. Each brand has slight variation on how this works, so if you are struggling, check the user manual for your cable box or television's specific instructions.

Tips & Warnings

  • If your cable box only has audio video outputs, the Wii won't work when plugged into it. You must use inputs.

Related Searches

References

  • Photo Credit Hanging Television Cables image by Van Ness from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!