How to Unclog a Garbage Disposal That Is Full of Gravel

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Garbage disposals are effective in grinding up vegetable peelings.

Garbage disposals are a convenient appliance in the kitchen sink. Scraping your dinner plate remains and vegetable scraps into the hopper or cylinder is an effective way to keep food out of your trash can and prevent it from stinking. Hard objects, such as gravel or bones from meat, may get into your disposal and not grind totally. The objects get stuck in the disposal and can cause damage if you do not remove them. Removing the gravel or other debris prevents a costly plumbing repair.

Advertisement

Step 1

Turn off the garbage disposal on the wall switch and at the main electrical service panel. Doing this prevents injuries while removing the gravel.

Video of the Day

Step 2

Turn the wall switch on to make sure you turned the disposer off correctly in the service panel. Also, press the reset button on the bottom of your garbage disposal and attempt to turn it on again to ensure there is no power to the unit before beginning.

Advertisement

Step 3

Remove any loose gravel from the garbage disposal with the aid of a flashlight and pair of kitchen tongs or a bent wire coat hanger. Get as much gravel out as possible. There may be rocks that are stuck in the flywheel that you cannot remove with the tongs.

Step 4

Stick a rolling pin or a short broom handle down into the hopper, or cylinder, of the garbage disposal, and try to force the flywheel to turn. There will be vertical pieces of metal -- the impellers -- that you can push against with the broom handle. This may require a lot of force. You can push the impellers in either direction to loosen the rocks.

Advertisement

Step 5

Remove any gravel you have successfully loosened with the tongs. Try pushing on the impellers once again with the rolling pin or broom handle. You may feel the flywheel -- a round metal disc -- break free or be able to push them more easily.

Step 6

Turn the power back on at the service panel and the wall switch once you feel the flywheel break free.

Advertisement

Step 7

Press the reset button underneath the unit. Turn on the water and the wall switch two or three times in quick bursts. The flywheel should now spin and allow any stuck gravel to pass through the drain. If not, repeat the method.

Video of the Day

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...