How to Connect Water to a Maytag Refrigerator

Save

Whether you have an old Maytag refrigerator with a water or ice machine or a newer model, you'll need to attach the water to the refrigerator before the appliance can give you water or create ice. The water supply hookup for Maytag refrigerators is usually located on the back of the refrigerator. If you can't find the hookup itself, check the manual for your Maytag refrigerator. Although the way you hook up your refrigerator to the water supply may vary slightly depending on the model, the basic process is the same.

Things You'll Need

  • Nut
  • Coupling
  • Adjustable wrench
  • Pull your refrigerator out from the wall. Unplug the refrigerator. Maneuver the refrigerator so you can get behind it and move a little.

  • Locate both the water supply line behind your refrigerator and the hookup on the refrigerator itself. Make sure the water running to the water supply line is off.

  • Remove the plug from the tip of the refrigerator water tubing or valve inlet.

  • Attach the water supply line to the valve or refrigerator water tube using a nut and an adjustable wrench. In most cases, you'll need to slip the nut over the tip of the water supply line before connecting the line to the refrigerator hookup. If the refrigerator tubing is not long enough to meet your water supply line, add a 1/4-by-1/4-inch coupling to lengthen the line before attaching the nut.

  • Tighten the nut. Do not overtighten.

  • Turn the water supply on to make sure the hookup or tube isn't leaking.

  • Push the refrigerator water tube into the tube clamp on the back of the refrigerator, if present, to avoid damage to the tube once the refrigerator is back against the wall.

  • Plug the refrigerator cord back into the electrical outlet. Maneuver the refrigerator back into the correct position.

  • Hold a bowl or glass under the water dispenser. Push the dispenser lever. Fill the bowl with water. Repeat the process until you've filled and emptied approximately 3 gallons of water from your water vessel. This removes any air from the line.

Related Searches

References

Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Hook Up a Whirlpool Ice Maker

    The Whirlpool style icemaker has been such a successful design that many other manufacturers besides Whirlpool have started using the icemaker in...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!