How to Paint Steam Pipes

Save

Painting steam pipes is a project that most homeowners can accomplish. You need to consider a few things before painting metals and steam lines. Metal will require a special paint. You also need a heat resistant paint. If you are painting old pipes you will need to strip them and drain the lines. This will also mean shutting down the furnace. It is best to do the project in the summer.

Things You'll Need

  • Wire brush
  • 2-inch paintbrush
  • Metal specific heat resistant paint
  • Turn off all the water to the boiler and drain the lines. You need to do this even in the summer since the moisture from condensation may cause the paint to cure incorrectly.

  • Scrape the length of the pies you are going to paint to remove old paint and to rough the surface so that the paint will adhere to it. Old flaking paint will cause the new coat to become prone to flaking because of the heat.

  • Paint the lines with the metal and heat specific paint. A smaller paintbrush will make the project easier and cleaner since there will not be as much dripping. It is best to start the project early in the morning since this will give you a longer drying period in warmer hours.

Related Searches

References

  • "Complete Home Repair Manual;" Time-Life Books; 1987
Promoted By Zergnet

Comments

You May Also Like

  • How to Remove Paint With Steam

    Layers of old paint on top of wood can be very difficult to remove with traditional sanding methods. One way to make...

  • How Do I Insulate Steam Pipes?

    The process of applying material to insulate steam pipes can greatly increase the heating efficiency of a steam system. Steam is commonly...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!