How to Install a Nortech Wireless Security Camera
Having a wireless security camera is one way to help provide a sense of safety at your home. Early cameras were difficult to install, since they mainly catered to businesses. In today's security-conscious climate, the wireless camera is more user-friendly. Cameras are easier to purchase, install and have working within minutes. The Nortech wireless security system offers quick installation instructions and customer service support. Whatever the reason for installing the Nortech system, you can do it with confidence.
Other People Are Reading
Things You'll Need
- Nortech wireless camera
- Nortech wireless receiver
- Antenna for receiver
- AV cable
- Adapter for camera and receiver
Instructions
-
-
1
Remove all the necessary parts from the packaging. Make sure your hands are dry. Check that you have all the required pieces before you begin. Call Nortech's customer service at 866-578-0101 if you have questions about your wireless system.
-
2
Place the camera where you want it to go. Adjust the camera to a desirable angle.
-
-
3
Attach the camera adapter to the back of the camera.
-
4
Attach the antenna to the rear of the receiver.
-
5
Attach the other end of the receiver to a television or monitor with AV cable. Make sure that you match the red cable to the audio input and the yellow to the video input.
-
6
Plug the adapter into the receiver. Turn the switch to "On."
-
7
Turn the monitor or television set on and set it to "AV" mode.
-
8
Tune the receiver channel to the camera until you see images appear on the television or monitor.
-
9
Use the controls to adjust the contrast and color until you achieve the desired effect.
-
10
Take the battery insulation space out of the remote control so you will be able to use it.
-
1
Tips & Warnings
Use only the power source instructed on the marketing label.
Disconnect the unit from the power supply during storms or when not in use for an extended period.
Keep away from radiators or other heating appliances.
Turn off both the camera and the receivers when they are not in use.
Do not use harsh chemical to clean your unit.
